RoVal Manufacturing Corp.

FAQs

Floors with a Gloss: Providing the floor is properly maintained and the sealer is protected with RoVal Reflecta Polish (interior only), you may never have to reseal again! Click here for our "General Maintenance" guide for instructions on how to properly maintain and care for your floor.
No Gloss or Natural Look Floors: Floors sealed with penetrating type sealers should be periodically or seasonally inspected to ensure the proper level of protection is maintained. Simply clean the area and reapply the sealer on an "as needed" basis.

Life at RoVal would be a lot easier if we only had to make one sealer for every type of surface that we run into. However, as long as there are so many different types of surfaces that require sealer, we will continue to develop products that fit each specific need that you, the customer, request. Each sealer produces a different look that ranges from matte, to satin, to high gloss. Some enrich the colors of the surface, while others leave a more natural appearance. Pick the sealer that's right for you.

Are sealers difficult to use?

No. Our products are formulated for high performance and ease in application. Each sealer label has specific instructions for applying them correctly. Always follow the label instructions exactly as they are written. If you have specific questions concerning the use of any of our products, as well as, others that you may have used, call us directly.

Yes. To ensure the easiest and most successful removal of the sealer, you will need to know a few things about the sealer that you are removing. Click here for "Strip & Reseal" guidelines.

Probably, so avoid applying it to your roses (or any vegetation for that matter).

Yes. Some are in solvents that are flammable and some are corrosive liquids. Most are non-hazardous to humans, plants and animals. All products come with explicit instructions for their safe use. We at RoVal are committed to developing the industries most high performance, safe and easy to use, water based product line available in today's marketplace. Currently we have a non-hazardous, direct offset product for every hazmat product we produce and out of 23 different products that we make, only four are considered hazardous by the U.S. D.O.T. As technology permits, we will continue to introduce safe alternatives for the industry.

Click here for "Efflorescence".

Phone: 813.988.4910
Fax: 813.988-4840